DigiTech Home

My Account

Help

Contact Support
FAQ FAQs

Message Board
   popular threads

 

 

 

Report A Problem

Report Abuse

 

 

 

 

login | create account

Legacy Products Thread :: Control X cable? (SOLVED) 

(requires login)

Author

Message

swamprock

member since: 02/20/2014
messages: 1
 

Subject:

Control X cable? (SOLVED)

02/20/2014


I picked up an old Control X foot controller for almost nothing, but it didn't come with a cable. From what I've read about the Control 1, they both used the same 5-pin DIN cable that supplied power to the controller. Is this correct, and where could I find such a cable? My searches have turned up very vague results that left me unsure of what I should buy. The cable I need is the 5-pin DIN, male to male, that has all five pins wired up. I'm going to use the Control X with an old Johnson J-Station.

Any help would be greatly appreciated. Thanks!

EDIT: I figured it out. Any MIDI cable with all five pins wired up will work. It's best to buy a good one, though...

MosherZone

member since: 06/21/2013
messages: 5
 

Subject:

Re: Control X cable? (SOLVED)

06/26/2014


I'm not sure if the cable is the same as the Control One but if it is you can get a cable here.
http://www.nocrotec.com/shop/product_info.php/info/p135_Digitech-Cable-for-Control-One--and-other--foot-controllers.html

(requires login)

Vote on this thread:

Mark this as a "Sticky" thread.
Don't mark this as a sticky thread.

(requires login)

 

© 2018 DigiTech®. All Rights Reserved.